AJAX SYSTEMS AJ-S-LP-FIBRA, SUPERIOR LINEPROTECT FIBRA
AJAX SYSTEMS AJ-S-LP-FIBRA, SUPERIOR LINEPROTECT FIBRA
Attention! Ajax Fibra products are available only to certified installers. If you have not completed the certification process, please contact our Sales Department for guidance.
| • Protection from applying 110/230 V overvoltage • Remote control and configuration • Low power consumption up to 0.17 W • Informative in-app notifications • Can be installed at any point of the Fibra line • Up to 2,000 m distance of wired communication with an Ajax hub • Fibra wired communication • Power adjustment • Tamper alarm when mounted into Case • Length of Fibra line up to 2,000 m for LineProtect output • Compliance: Grade 3 (EN 50131), PD 6662:2017, VSO |
Superior LineProtect Fibra is a module designed to protect devices on the Fibra line from short circuit and sabotage: 110/230 V~ voltage supply to the line, hit with the stun gun.
The module works in an Ajax system and exchanges data with the hub using the secure Fibra wired communication protocol.
LineProtect is a part of the Fibra product line of wired devices. Only accredited Ajax Systems partners can buy, install, and administer Fibra products.
Operating principle
LineProtect is a module designed to protect devices connected to the input line on the Fibra line in an Ajax system. It connects to any point of the Fibra line.
The module protects devices installed on the Fibra line between LineProtect and the hub, as well as the hub itself. LineProtect does not protect devices between the module and the end of the line.
You need to connect one input and one output Fibra line to LineProtect. Use Superior LineSplit Fibra to divide the line. Do not install LineProtect on the Fibra line created in a Ring topology.
The module protects the hub and Fibra devices from the following threats:
• 110/230 V~ voltage supply.
• Short circuit on the line.
• Hit with the stun gun.
• Overvoltage on the Fibra signal lines.
LineProtect distinguishes the intervention type, and the system sends the corresponding notification to the Ajax apps.
Fuses are triggered if an abnormal voltage is supplied on the Fibra line. In this case, LineProtect can fail, so it needs to be replaced. The users and the security company will receive the corresponding notification.
Fibra data transfer protocol
The module uses Fibra technology to transmit alarms and events. It is a wired data transfer protocol for fast and reliable two-way communication between the hub and connected devices.
Sending events to the monitoring station
The Ajax system transmits alarms to the PRO Desktop monitoring app, as well as to the central monitoring station (CMS) using SurGard (Contact ID), SIA (DC-09), ADEMCO 685, and other protocols.
LineProtect can transmit the following events:
- Tamper alarm and turning off the alarm.
- Low supply voltage and voltage return to normal values.
- Loss and restoration of communication between LineProtect and the hub.
- Permanent deactivation and activation of the device.
- One-time deactivation and activation of the device.
- Short circuit on the Fibra line and power supply restoration.
- Overvoltage on the Fibra signal lines and voltage return to normal values.
- Faulty fuse.
When an alarm is received, the CMS operator knows exactly what happened and where to send the rapid response team. The Ajax devices are addressable, meaning that PRO Desktop app and CMS receive events, device type, assigned name, and location (room, group). The list of transmitted parameters may differ depending on the CMS type and the selected communication protocol.
| Specification | |
| Communication | |
| Fibra communication technology |
Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection. Key features: • Two-way communication. |
| Line connection | 4-core cable |
| Connection | to any point of the Fibra line |
| Fibra line length | up to 2,000 m |
| Lines connection |
|
| Number of output lines | 1 |
| Number of input lines | 1 |
| Cable length | up to 2,000 m |
| Lines protection |
|
| Voltage supply | 110/230 V~ |
| Overvoltage | on the Fibra signal lines |
| Notifications | The device distinguishes the intervention type, and the system sends the corresponding notification to the users and the security company. |
| Alert with a siren | The siren indicates with the buzzer and LED frame, if the output line alarm is detected. |
| Recommendations | For indoor use only. It is recommended to install it in Case that is sold separately and available in several options. |
| Module protection | |
| Tamper alarm | LineProtect has a connector to fasten the tamper board to the module. The tamper board is in Case that is sold separately. |
| Protection against spoofing | device authentication |
| Lost connection detection | after 36 s |
| Power supply | |
| Module’s operating voltage range | 5.7−30 V⎓, up to 281 mW |
| Module’s nominal operating voltage | 24 V⎓ |
| Quiescent module’s current consumption at nominal voltage | 1.6 mA |
| Maximum module’s current consumption at nominal voltage | 11.7 mA |
| Board | |
| Dimensions | 90 × 50 × 15 mm |
| Weight | 12 g |
| Operating temperature range | from −10°C to +40°C |
| Operating humidity | up to 75% |
| Complete set | Superior LineProtect Fibra Quick start guide |
