Hikvision DS-PA502-128 AX Hybrid Pro Control Panel Unit 128 Zones
Hikvision DS-PA502-128 AX Hybrid Pro Control Panel Unit 128 Zones
• 128 zones and 128 outputs
• 64 areas
• 1 installer, 1 admin, 128 operators
• Dual bus, up to 64 bus devices per bus
• Support LAN, Wi-Fi, support optional PSTN/GPRS/4G Communicator
• Support 16-ch onboard IPC video verification cache
• Support ISUP, OTAP protocols
• EN50131 Grade 2
| Specification | |
| Inputs | |
| Max. Zones | 128 |
| On-board zones | 8 |
| Bus PIR-cameras | 48 |
| Outputs | |
| Max. outputs | 128 |
| On-board PGM outputs | 2 |
| On-board relay outputs | 2 |
| Auxiliary Power Output | 1 |
| On-board sounder output | 1 |
| Areas | |
| Area | 64 |
| Peripherals | |
| Keypads | 32 |
| 8-zone expanders | 16 |
| 8-relay expanders | 32 |
| Wireless receivers | 12 |
| Power supply units | 15 |
| Video verification | |
| Network camera channels | 32 |
| Video verification network camera channels |
Up to 16 (720p) Up to 8 (1080p) |
| Video verification clip duration | 7 seconds |
| Pre-record | 2 or 5 seconds |
| Programming | |
| Automation scenarios | 256 |
| Event logs | |
| Event log records | 4950 including 1000 mandatory in flash memory |
| Users |
|
| Admin | 1 |
| Installer | 1 |
| Max. operators | 128 |
| User (Cloud) | 64 |
| Authorization devices | |
| Keyfobs | 64 |
| Tags | 252 |
| Bus interconnection |
|
| Bus ports | 2 |
| Bus technology | Half-Duplex RS-485 |
| Bus wiring | 4-Core Alarm Cable (at least 2 × 0.5 mm² + 2 × 0.22 mm²) |
| Bus topologies | Daisy Chain, Cascade, Star, Ring |
| Range per Bus | Up to 500m (Up to 7.5km with bus-extenders, Up to 4km in loop mode, Up to 1km in compatible mode) |
| Bus-extenders per Bus | Up to 15 pcs, 500m in between |
| Devices per Bus | 64 (32 in compatible mode) |
| Communication interfaces | |
| LAN/Ethernet | 10/100 Mbps self-adaptive |
| Wi-Fi | 802.11b/g/n (2.4GHz) |
| GPRS | Compatible with DS-PC501G(Optional) |
| 4G/LTE | Compatible with DS-PC502S (Optional) |
| PSTN | Compatible with DS-PM2-P(Optional) |
| ARC connectivity | |
| ARCs | 4 |
| Signaling protocols | ISUP, Contact ID(PSTN), SIA DC-09, CSV-IP, OTAP |
| Ack. operation | Pass-through |
| ATS Categories | SP3, DP2 (with optional GPRS/4G communicator) |
| 3rd party communicator | Compatible with FSK, RDC, IDS modules |
| Power supply - general | |
| PS type | Type A |
| Quiescent current | 130 mA @15VDC (when on battery) |
| Power supply - primary power supply | |
| Mains Input | 100-240VAC 50/60Hz, 0.3A |
| Power supply capacity | 15.3 VDC 2.5 A (0.5 A dedicated to battery) |
| Power supply - auxiliary power supply | |
| Battery pack | 1 × rechargeable sealed lead-acid (SLA) battery (not included by default) |
| Battery capacity | 12VDC, up to 7Ah (≥ 5600 mAh in charged state) |
| Recommended battery | OUTDO OT7-12 (7Ah), Yuasa NP7-12FR (7Ah) |
| Battery stand-by | Up to 12 hrs |
| Recharge period | 24 hrs to 80% (5600 mAh) |
| Floating voltage | 13.8VDC |
| Low energy voltage | 11.60±0.5 V (Restore when rise above 11.74±0.5 V) |
| Cut-off voltage | 11.0 VDC for deep-discharge protection |
| Power supply - auxiliary power output | |
| Output capacity | Nominal 14.5VDC 1.5A, range 10.7-15 VDC with up to 120 mV ripple (Vpp) |
| Output protection | 1.7 A resettable eFuse |
| Power supply - Bus power output |
|
| Output capacity | Nominal 14.5VDC, range 10.7-15 VDC with up to 120 mV ripple (Vpp), max. 20W (shared AUX power output) |
| Output protection | (Shared AUX power output) |
| Power supply - sounder power output |
|
| Output capacity | Nominal 14.5VDC 1.0A, range 10.7-15 VDC with up to 120 mV ripple (Vpp) |
| Output protection | 1.3 A resettable eFuse |
| PGM output |
|
| Output voltage | 0 VDC with switched (NPN output) |
| Max. current | 200 mA per output |
| Relay output |
|
| Relay output | 3A 30VDC, 1A 250VAC |
| Environmental | |
| Operating temperature | -10°C to 50°C , indoor use only |
| Storage temperature | -20°C to 60°C |
| Relative humidity | 10% ~ 90% non-condensing |
| Physical | |
| Dimension (W × H × D) | 231 × 133 × 44 mm |
| Weight | 488 g |
| Compliance | |
| Electrical conformity | CE, CB |
| EN 50131 | Security Grade 2, Environmental Class II |
Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 2400 – 2483,5 MHz, provides for a maximum transmit power of 100mW e.i.r.p.
At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor use.
