AJAX SYSTEMS AJ-S-MULTR-FIBRA-W, SUPERIOR MULTITRANSMITTER FIBRA WHITE
AJAX SYSTEMS AJ-S-MULTR-FIBRA-W, SUPERIOR MULTITRANSMITTER FIBRA WHITE
Attention! Ajax Fibra products are available only to certified installers. If you have not completed the certification process, please contact our Sales Department for guidance.
|
• 18 zones for connecting third-party detectors |
Superior MultiTransmitter Fibra is an integration module designed to connect third-party wired devices to an Ajax system. It features 18 zones for connecting NC, NO, EOL, 2EOL, and 3EOL devices. The integration module is available in two versions: either in default casing or as a board without casing. The latter is called Superior MultiTransmitter Fibra (without casing) and can be installed into Case D (430).
Superior MultiTransmitter Fibra is equipped with two tampers for protection against dismantling. The device is powered from the 100–240 V~ mains, and can also be powered from the 12 V⎓ backup battery. It can supply 10.5–15 V⎓ power to connected devices.
Superior MultiTransmitter Fibra works as part of an Ajax system, exchanging data with the hub using the secure Fibra wired protocol. The wired connection range is up to 2,000 meters when using a U/UTP cat.5 twisted pair.
This is a device of the Ajax Superior product line. Only accredited Ajax Systems partners can sell, install and administer Ajax Superior products.
Operating principle
Superior MultiTransmitter Fibra is designed to integrate third-party wired devices into an Ajax system. The integration module receives information about alarms, malfunctions, and events from devices through a wired connection. After that, it sends the event to Superior Hub Hybrid using the Fibra data transfer wired protocol. And Superior Hub Hybrid sends messages to users and the security company CMS (central monitoring station).
Superior MultiTransmitter Fibra is used to integrate alarm and auxiliary request alert buttons, indoor and outdoor motion detectors. As well as detectors that track opening, vibration, glass breaking, fire, gas and water leakage, etc.
Also, you can set up KeyArm Zone that allows switching system arming modes with a third-party device connected to Superior MultiTransmitter Fibra. KeyArm allows you to arm/disarm the system, individual groups, or manage Night Mode.
The device type is specified in the settings of the zone to which the wired detector or device is connected. The selected type determines the text of alarm messages and events of the connected device, as well as event codes transmitted to the CMS.
The wired device connected to Superior MultiTransmitter Fibra can operate in one of the following sensor modes:
• Detect alarms
• Switch arming modes
• Control of blocking element
• Control of bolt lock
Fibra communication protocol
The integration module uses Fibra technology to transmit alarms and events. This is a two-way wired data transfer protocol that provides fast and reliable communication between the hub and integration module. Using the bus connection method, Fibra delivers alarms and events instantly, even if 100 devices are connected to the system.
Fibra supports block encryption with dynamic key and verifies each communication session with devices to prevent sabotage and spoofing. The protocol provides for regular polling of devices by the hub at a specified frequency to control communication and display the state of system devices in Ajax apps.
Sending events to the Central Monitoring Station (CMS)
An Ajax system can transmit alarms to the PRO Desktop monitoring app as well as the Central Monitoring Station (CMS) using SurGard (Contact ID), SIA DC-09 (ADM-CID), ADEMCO 685, and other proprietary protocols.
Superior MultiTransmitter Fibra can transmit the following events:
- Superior MultiTransmitter Fibra tampers alarm/restoration.
- Connected devices alarm/restoration.
- Loss/recovery of communication between Superior MultiTransmitter Fibra and hub.
- Disabling/enabling Superior MultiTransmitter Fibra.
- Disabling/enabling wired detectors and devices connected to Superior MultiTransmitter Fibra.
- Unsuccessful attempt to arm the system.
When an alarm is received, the monitoring station operator of the security company knows what happened and where the rapid response unit has to be sent. All Ajax devices are addressable, so events, the device type, its assigned name and room can be transmitted to PRO Desktop and the CMS. The list of transmitted parameters may differ depending on the type of the CMS and the selected communication protocol.
| Technical Specifications | |
| Communication | |
| Fibra communication technology |
Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection. Key features: • Two-way communication. |
| Line connection | 4-core cable |
| Fibra line length | up to 2,000 m |
| Wired devices connection | |
| Number of zones | 18 wired zones |
| Type of connection | NC, NO, EOL, 2EOL, 3EOL |
| Cable length | up to 400 m |
| Operation mode | pulse, bistable |
| Event types |
15 event types for wired devices are available: • Tamper alarm |
| Recommendations |
The device is powered by 100–240 V~ mains and designed for indoor use only. |
| Sabotage protection | |
| Tamper alarm | Two tampers detect the opening of the lid and notify of attempts to tear the device from the surface or remove it from the mount. |
| Protection against forgery | Device authentication |
| Communication loss detection | within 36 seconds |
| Instant detection of wired connection loss, short circuits, and malfunctions | when 2EOL/3EOL connection is used |
| Power supply | |
| Main | 100–240 V~ |
| Backup | 12 V⎓, up to 7 Ah capacity with a full charge cycle of up to 30 hours |
| Type | type A |
| Operating AC voltage range | 100–240 V~, 50/60 Hz |
| Operating DC voltage range | 10.5–15 V⎓ |
| Quiescent current consumption at nominal voltage | 25 mA |
| Maximum current consumption at nominal voltage | 30 mA |
| Backup rechargeable battery capacity | up to 7 Ah with a full charge cycle of up to 30 hours |
| Power supply of connected wired devices | 10.5–15 V⎓, up to 1 A (total maximum current consumption) |
| Power supply of connected fire detectors | 10.5–15 V⎓, up to 0.4 A |
| Low battery voltage | 11.6 V⎓ |
| Low battery recovery voltage | 12.9 V⎓ |
| End-of-life battery voltage | 11 V⎓ |
| Maximum output peak-to-peak ripple voltage | 200 mV⎓ |
| Minimum backup rechargeable battery energy level in the charged state | 100% |
| Casing | |
| Dimensions | 197 × 240 × 100 mm |
| Weight of the device in a white casing | 867 g |
| Operating temperature range | from −10°C to +40°C |
| Operating humidity | up to 75% |
| Protection class | IP30, IK06 |
| Complete set |
Superior MultiTransmitter Fibra |
