 1.png)
AJAX SYSTEMS AJ-WL-SW - WALL SWITCH
AJAX SYSTEMS AJ-WL-SW - WALL SWITCH
| • Allows checking electricity consumption • Executes automation scenarios • Up to 1,000 m of the encrypted wireless two-way communication with hub or range extender • Operates in bistable or pulse mode. Adjustable pulse duration: from 1 to 255 seconds • Device is controlled via mobile and desktop apps or manually with the device function button • Pairing with a hub via QR code |
Operating principle
WallSwitch is a power relay of the Ajax system. The relay is installed in the electrical circuit gap to control the power supply of devices connected to this circuit. The relay can be controlled via the function button on the device (by holding it down for 2 seconds), the Ajax app, Button, and automation scenarios.
WallSwitch switches one single pole of the electrical circuit — the phase. In this case, the neutral is not commuted and remains closed.
WallSwitch can operate in bistable or pulse mode (pulse mode is available with firmware version 5.54.1.0 and higher). The pulse duration can be set in pulse mode from 1 to 255 seconds. The operating mode is selected by users or PRO with admin rights in Ajax apps.
The user or PRO with administrator rights can also set the normal state of the relay contacts (the function is available for WallSwitch with firmware version 5.54.1.0 and higher):
• Normally closed — the relay stops supplying power when activated and resumes when deactivated.
• Normally open — the relay supplies power when activated and stops when deactivated.
WallSwitch measures the current, voltage, the amount of energy consumed by electrical appliances, and the power they consume. This data, along with other operating parameters of the relay, is available in the device States. Relay states update frequency depends on Jeweller or Jeweller/Fibra settings; the default value is 36 seconds.
| Parameters | |
| Power supply | 110–230 V~, 50/60 Hz |
| Maximum continuous load current | 13 А |
| Output power | up to 3.0 kW (resistive load at 230 V~) up to 1.5 kW (resistive load at 110 V~) |
| Average consumption | up to 1 W |
| Power parameters available in the app |
current voltage power consumption, electrical energy meter |
| Voltage protection threshold (for 230 V~ mains) | maximum 253 V~ minimum 184 V~ |
| Voltage protection threshold (for 110 V~ mains) | maximum 132 V~ minimum 92 V~ |
| Current protection | more than 11 A (when Overcurrent protection is enabled) more than 13 A (when Overcurrent protection is disabled) |
| Temperature protection threshold |
over +65°C at the place of installation over +85°C inside WallSwitch |
| Colour | black |
| Dimensions | 39 × 33 × 18 mm |
| Weight | 30 g |
| Operating temperature range | from 0°C to +64°С |
| Operating humidity | up to 75% with no condensation |
| Ingress protection class | IP20 |
| Package Contents | WallSwitch Jeweller Double-sided tape Quick Start Guide |
Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 863 – 870 MHz, provides for a maximum transmit power as described in the radio equipment interface requirement 105. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor and outdoor use.
