 1.png)
Ubiquiti USW-Pro-XG-Aggregation, Professional-Grade 32-Port, Layer 3 Etherlighting, 25G SFP28 Connections
The USW-Pro-XG-Aggregation is a fully managed L3 switch in a 19" rackmount chassis featuring 32× SFP28 ports (supporting 1 G / 10 G / 25 Gbps) with the Etherlighting function, allowing you to illuminate ports in different colors to indicate port location, speed/link status, and native VLAN/network. It is equipped with a 1.3" touchscreen display capable of showing individual port statistics, error states, network load, and other information. The USW-Pro-XG-Aggregation is managed via the UniFi Controller or mobile app, enabling easy creation, scaling, and monitoring of your enterprise network.
Key Features
- (32) 1G / 10G / 25Gbps (SFP28)
- Etherlighting – illuminated port status indicators
- 1.6 Tbps switching capacity
- Touchscreen display
- Redundant power via SmartPower RPS connector
- Management through UniFi Network server
Managed via UniFi Controller
The USW-Pro-XG-Aggregation does not have a web interface; it is centrally managed via the UniFi Network server with support for the UniFi mobile app. It offers an extensive set of advanced L2 switching protocols and features, including per-port operating modes (switching, mirroring, or aggregation). The UniFi Network server and mobile app allow administrators to configure and monitor virtually all switch functions through a graphical user interface from anywhere.
Redundant Power
This generation of switches supports redundant power through a dedicated connector to the UniFi SmartPower unit in case the switch’s primary power source fails.
Package Contents
- Device
- Power cable
- 19" rackmount brackets
| Overview | |
| Dimensions | 442.4 x 43.7 x 480 mm |
| Port Layout 25G SFP28 | 32 (25G/10G/1G) |
| Redundancy |
DC Power Backup
|
| Layer 3 | Yes |
| Form Factor | Rack Mount (1U) |
| Etherlighting™ | Yes |
| Performance | |
| Switching Capacity | 1.6 Tbps |
| Total Non-Blocking Throughput | 800 Gbps |
| Forwarding Rate | 1.2 Bpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 32,000 |
| L3 Table Size |
ARP Entries 128,000 IPv4 Routes 256,000 |
| Packet Buffer Size | 8 MB |
| Access Lists | IPv4 256 MAC 256 |
| Layer 3 Features | DHCP Server (Local Networks) DHCP Relay Inter-VLAN Routing (Local Networks) Static Routing (Local Networks) |
| Layer 2 Features | LACP Port Aggregation STP & RSTP Advanced IGMP Configuration (Querier, Fast Leave, Router Port) IGMP Snooping 802.1X Control MAC-Based ACLs & Device Isolation DHCP Snooping & Guarding Egress Rate Limit Flow Control Storm Control Multicast & Broadcast Rate Limiting MAC Address Blocking IP-Based ACLs & Network Isolation MAC-Based Port Restriction Port Isolation Port Mirroring Jumbo Frames LLDP-MED Voice VLAN Loop Protection |
| Hardware | |
| Max. Power Consumption | 200W |
| Power Method | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP RPS DC input |
| Power Input Method | AC input |
| Power Supply | AC/DC, internal, 200W |
| Supported Voltage Range | 100—240V AC |
| Management | Ethernet AR |
| Heat Dissipation (Excluding PoE Output) | 457 BTU/hr |
| Weight | Without mounting bracket: 7.1 kg With mounting bracket:7.2 kg |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 482.6 mm (19") four-post racks Posts depths ranging from 600 to 1,066 mm (23.6-42”) |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air: ± 12kV, contact: ± 8kV |
| Ambient Operating Temperature | -5 to 40° C |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Etherlighting™ |
SFP28
|
| LEDs |
RPS
|
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC |
