 1.png)
Ubiquiti USW-PRO-XG-48, Etherlighting Switch, Layer 3, 32x10 GbE, 16x2.5 GbE, 4x25G SFP28 Ports
The UniFi Switch Pro XG 48 is a rackmount manageable 10-Gigabit L3 Switch with a switching capacity of 920 Gbps, featuring (32) 10 Gigabit + (16) 2.5 Gigabit ports and four SFP28 (1/10/25Gbps) slots. The switch can be powered via standard 230 V or through UniFi SmartPower RPS, which primarily serves as a backup power source in case of internal power supply failure. A new feature is Etherlighting, color port lighting that indicates port location, speed, or VLAN identification.
Key Features:
• (32) 1G/2.5G/5G/10 Gbps + (16) 100M/1G/2.5G LAN ports
• (4) 1/10/25G SFP+ slots
• 1.3" touch display
• Etherlighting – port backlighting
• Backup power via SmartPower RPS connector
• Supported in UniFi Network from version 9.0.114
Management via UniFi Network
The UniFi switch does not have a web management interface but is centrally managed using UniFi Network with support for the UniFi mobile app. It offers a wide range of advanced L2 and L3 switching protocols and features, including per-port operating modes (switching, mirroring, or aggregation). The UniFi Network Controller and mobile app allow administrators to configure and monitor virtually all switch functions through a graphical user interface from anywhere.
Package Contents:
• Device
• Power cable
• Front 19" rack mounting brackets
• Rear sliding 19" rack mounting brackets
| Overview | |
| Dimensions | 442 x 480 x 44 mm |
| Port Layout | 2.5 GbE RJ45 16 (2.5G/1G/100M/10M) 10 GbE RJ45 32 (10G/5G/2.5G/1G/100M/10M) 25G SFP28 4 (25G/10G/1G) |
| Redundancy | DC Power Backup |
| Layer 3 | Yes |
| Form Factor | Rack mount (1U) |
| Etherlighting™ | Yes |
| Performance | |
| Switching Capacity | 920 Gbps |
| Total Non-Blocking Throughput | 460 Gbps |
| Forwarding Rate | 684 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 128,000 |
| L3 Table Size | ARP Entries 128,000 IPv4 Routes 256,000 |
| Packet Buffer Size | 8 MB |
| Access Lists | IPv4 256 MAC 256 |
| Layer 3 Features | DHCP Server (Local Networks) DHCP Relay Inter-VLAN Routing (Local Networks) Static Routing (Local Networks) |
| Layer 2 Features | LACP Port Aggregation STP & RSTP Advanced IGMP Configuration (Querier, Fast Leave, Router Port) IGMP Snooping 802.1X Control MAC-Based ACLs & Device Isolation DHCP Snooping & Guarding Egress Rate Limit Flow Control Storm Control Multicast & Broadcast Rate Limiting MAC Address Blocking IP-Based ACLs & Network Isolation MAC-Based Port Restriction Port Isolation Port Mirroring Jumbo Frames LLDP-MED Voice VLAN Loop Protection |
| Hardware | |
| Max. Power Consumption | 250W |
| Power Method | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP RPS DC input |
| Power Input Method | AC input |
| Power Supply | AC/DC, internal, 300W |
| Supported Voltage Range | 100—240V AC |
| Management | Ethernet AR |
| Weight | Without mounting brackets: 7.5 kg With mounting brackets: 7.6 kg |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 482.6 mm (19") four-post racks Posts depths ranging from 600 to 1,066 mm (23.6-42”) |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air: ± 30kV, contact: ± 14kV |
| Ambient Operating Temperature | -5 to 40° C |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Etherlighting™ | SFP+ QSFP28 |
| LEDs | RPS |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC |
| Software | |
| Application Requirements | UniFi Network Version 9.0.114 and later |
