 1.png)
TP-LINK EAP235-Wall V1.2 AC1200 Wireless MU-MIMO Gigabit Wall-Plate Access Point
CAUTION! Package does not include power supply!
| • Dual-Band Wi-Fi 5: 867 Mbps on 5 GHz, and 300 Mbps on 2.4 GHz† • Gigabit Ports with PoE Flexibility: 1× PoE Input port, 1× PoE pass-through port, and 2× RJ45 downlink ports. • Low Congestion: MU-MIMO allows multiple devices to receive data simultaneously, reducing congestion and improving speed.‡ • Complete In-Room Wi-Fi Coverage: Guaranteed strong signals and corner-to-corner Wi-Fi coverage up to 300ft² (25 ㎡).* • Flexible Deployment and Easy Setup: Supports 802.3af/at PoE for flexible installation with Omada SDN for one-click setup. • Advanced Features: Supports centralized cloud management and Seamless Roaming.△ • More Connections: Supports 200 concurrent connections.** |
Full Gigabit Ports to Bridge Network
This device features four Gigabit data ports (1 uplink + 3 downlinks) for connecting multiple devices to your network, with one downlink port supporting PoE pass-through to eliminate the need for an extra power connection.
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
‡ MU-MIMO capability requires client devices that also support MU-MIMO.
*Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
**The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.
△These features require the use of an Omada controller.
| HARDWARE FEATURES | |||||||||||||
| Wi-Fi Standards | 5 GHz: IEEE 802.11a/n/ac 2.4 GHz: IEEE 802.11b/g/n |
||||||||||||
| Antenna | Wi-Fi : 2.4 GHz: 2 × 4 dBi(peak gain), internal omnidirectional antennas 5 GHz: 2 × 4 dBi (peak gain), internal omnidirectional antennas Note: The gains above are the single-antenna peak gains |
||||||||||||
| Interfaces | 1 x 10M/100M/1000M Gigabit Ethernet Port (RJ45 ) ;PoE in 2 x 10M/100M/1000M Gigabit Ethernet Port (RJ45 ) 1 x 10M/100M/1000M Gigabit Ethernet Port (RJ45 ) ;PoE out |
||||||||||||
| Memory | Flash: 128Mbit DRAM: 1024Mbit |
||||||||||||
| Button | 1 × Reset button: Press the button for longer than 5 seconds to make the device restore to factory settings. 1 x LED ON/OFF Control Button |
||||||||||||
| Indicator | 1 × white system LED indicates on the front: Power-on status Firmware initialization or upgrade status Error status |
||||||||||||
| Reliability | MTBF (Mean Time between Failure): 273413 hours (30 years) at the operating temperature of 25°C |
||||||||||||
| Power Supply |
|
||||||||||||
| Power Consumption |
|
||||||||||||
| Surge/Lightning Protection | Ethernet Ports: ±4 kV | ||||||||||||
| ESD/EMP Protection |
Air discharge: ±8 kV Contact discharge: ±4 kV Note: ESD/EMP Protection means Electrostatic Discharge/Electromagnetic Pulse Protection independently. |
||||||||||||
| Tx Power |
|
||||||||||||
| Environment |
|
||||||||||||
| Unit |
|
||||||||||||
Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 2400 – 2483,5 MHz, provides for a maximum transmit power of 100mW e.i.r.p.
At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor use.
Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 5150 – 5250MHz and 5250 – 5350MHz, provides for a maximum transmit power of 200 mW e.i.r.p. and in the frequency band 5470 – 5725MHz, provides for a maximum transmit power of 1 W e.i.r.p.
At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor use.
