Ubiquiti UniFi Access Reader G3 is a white, compact card reader from the UniFi Access system family. You can unlock doors using an NFC-compatible card, the UniFi Identity mobile app, and now also your Apple device, thanks to the Touch Pass feature. Unlocking doors has never been easier!

With its minimalist design and versatile mounting options, it fits seamlessly into any interior. The reader can be installed both flushed and surface-mounted.

Package Contents
• Reader
• Mountig box for flush install
• Mounting panel for US box
• Cover frame
• (2) Drilling templates
• RJ45 connector rubber cover
• Installation accessories

Warranties - Returns:
Money Return:	Repair - Replacement:
20 days	24 months

Specifications
Overview
Dimensions	93 x 40 x 36.5 mm
NFC Card & Keyfob Access	Yes
Apple/Google Wallet	Yes
Mobile Unlock	Yes
Handwave Request to Exit	Yes
NDAA Compliant	Yes
UL 294 Level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
Weatherproofing	IP55
Mechanical
Weight	82 g
Enclosure material	Polycarbonate, glass
Mount material	Aluminum alloy
Mounting	In-wall, gang box (Included) Junction box (Optional)
Hardware
Indoor and Outdoor Use	Yes
Ambient Operating Temperature	-30 to 45° C
Ambient Operating Humidity	5 to 90% noncondensing
Networking Interface	(1) 10/100 MbE RJ45 port
Connectivity	BLE 4.1 NFC
Power Method	PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption	5W
Supported Voltage Range	48V DC
ESD/EMP Protection	Air: ±15kV, contact: ±8kV
Sensors	Proximity sensor
Speaker	Yes
LEDs	R/G/B/W
Button	(1) Factory-reset
NFC Frequency	13.56 MHz
NFC Read Range	ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-G3, V01
Software
Management application	Access